KT 400

2883 times

KT-400 is an Ethernet-ready four-door controller that provides 128-bit AES encrypted communication with the EntraPass system and is a highly secure solution for any security-conscious business. KT-400 can easily be integrated into an existing EntraPass system with other Kantech controllers (KT-100 and KT-300) or can provide the foundation for a brand new security installation. With an onboard Ethernet port, an external IP device is no longer required to connect to the network. The onboard port is dual-sensing, which means the system senses whether the connection is 10Base-T or 100Base-T, and adjusts automatically for faster connectivity. KT-400 manages network polling and communicates with the EntraPass Gateway only when an event has occurred. Communication integrity is ensured through a heartbeat signal which is sent at regular intervals to the EntraPass system. This asynchronous communication significantly reduces the amount of bandwidth required to manage the access control system over the network.

Features

  • Supports four readers
  • Onboard Ethernet 128-bit AES-encrypted communication with the EntraPass system ensures a high degree of network security
  • Control the occupancy level in a defined location with the anti-passback feature
  • 100,000 cards capacity and provides up to 20,000 concurrent events in stand-alone mode
  • 256 outputs (four onboard) provide scalability
  • Communicates with the EntraPass Gateway only when an event has occurred, ensuring low network bandwidth consumption (Special and Corporate Editions only)
  • Verify and configure IP settings with a built-in web configuration page
  • Supervised door lock outputs with internal or external power supply
  • LEDs provide important controller status and diagnostic information
  • Additional battery supervision and monitoring help ensure controller functionality

KT 300

3047 times

The KT-300 door controller supports up to two readers, which can be installed either on a single door (to monitor both entry and exit) or on two separate doors. It provides connections for all peripheral devices necessary for a complete access control system and can be linked with other door controllers to provide control over millions of doors. Stand-alone mode protects against power or system failures and the system stores cardholder and event data, which is automatically transmitted back to the EntraPass system once the network connection is restored. Flash memory allows for firmware updates from an EntraPass workstation in just a few minutes. Built-in Combus expansion means that relay, input, and output modules can be added to connect HVAC systems, elevators, motion detectors, and more. The Combus is a communication protocol that is integral to the KT-300. It uses a four-conductor cable bus to which several expansion modules.

Features

  • Controls two doors and easily links to a network
  • Update the firmware directly from system workstation
  • Fast, up to 115,200 baud
  • Ready to go, no DIP switches or jumpers to set
  • 5V and 12V reader power
  • Interfaces with an external alarm system
  • Supervises battery conditions and reports low battery/no battery status to the system
  • Automatic trouble reporting
  • All power outputs are individually protected against short circuits and surges by a self-resetting PTC
  • Choice of two memory capacities, 128K or 512K

KT 200

3127 times

The KT-200 Door Controller is the basis of a 2-door access control system. The KT-200 is capable of controlling two separate doors or a single door (with readers on each side of the door). To form the system, each KT-200 is linked to other KT-200s using an “RS-485″ communication bus. A smaller initial system can grow to secure hundreds of doors just by adding more controllers and the appropriate software.

Features 

  • 2 doors / 2 readers panel
  • Built-in power supply for door locks (24 VDC)
  • 16 supervised inputs
  • 2 form C relays
  • RS-485 / RS-232 communication ports
  • Optional REB-8 relay modules (2 per KT-200)
  • Lithium batteries for memory backup
  • Status LED on board
  • ABA – Wiegand – BCD data input

KT 1

3188 times

The KT-100 Mini Door Controller is compact and versatile with a space-saving design that incorporates all the components and equipment found in much larger controllers. Choose it for installations near a door, within a ceiling, involving turnstiles and parking gates, or anywhere that requires less than 3.28 m (10 ft) of wiring. The KT-100 contains all the intelligence and necessary inputs/outputs to manage one door or link to a network controlling thousands of doors. The firmware program is stored in the controller flash memory and can easily be downloaded from the system’s EntraPass workstation without changing the memory chips. The KT-100 also allows installers to arm/disarm an external alarm system and to assign appropriate user permissions.

Features

  • Single door controller
  • Flash memory programming
  • Fast communication speed, up to 115,200 baud
  • Automated trouble reporting
  • Quick and easy installation, in a single gang box
  • Interfaces with an external alarm system
  • Update firmware directly from the workstation
  • No DIP switches or jumpers to set decreases installation time