SX

1743 times
  • International norms (NILECJ-0601 L1-5/IP44/EN60950 Class1) In conformity with CE European Union Norms and produced under ISO 9001: 2008 QMS
  • Multi-Zone – 9 Real Detection Zones(Up/Middle/Down and Left/Middle/Right)
  • Separate Zone Sensitivity Setting Feature
  • Whilst Normal Operation, displays IN/OUT Counters and Security Level on LCD without abbreviations so that Security Staff can easily understand
  • Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. Can detect when tested both individually and in combination and Gives Audio-Visual Alarms. Can operate at JAILHOUSE Sensitivity Spectrums!..
  • SMART DETECTOR – Fast and consistent calibration, Automatic Sensitivity Program selects the correct sensitivity for a specific weapon or a recognized test object
  • Displays the Detected Metal Objects location on Both Side Panels LEFT/RIGHT from bottom to top with Continuous LED Zone Indicators
  • Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.
  • No Interferences between Zones and No False Alarms
  • Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top
  • Detects Metals regardless their orientation
  • 20 sensitivity levels, 246 adjustable sensitivity steps at each, Preset NILECJ Sensitivity Program, Optional – 5 Preset Programs
  • Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance
  • Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit
  • Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By
  • Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media
  • Green/Red bicolor traffic through LEDs easily allows sight from distance 60 Persons/Minute and LED Alarm Indicators on side panels
  • Operation Mode, Programming Parameters and Error Codes are Displayed on Wide 4×20 Characters LCD Screen
  • Special Environmental Magnetic Interference Display Menu
  • Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation
  • Adjustable Alarm Duration (Detection Speed Regardless Alarms)
  • IR Protection Feature enabling perfect low false alarm operation/ Continuous Detection Mode Selection Enabled
  • IP 44 Protection Level (EN 60529)
  • Five Digit Incoming/ Outgoing & Alarm Counters (Visible/Invisible) can be reset to Zero
  • Interference free Operation from other Electronic Devices and Does Not affect other Electronic Equipments. Necessary filtering precautions have been taken
  • Four-digit changeable digital Pin Code and Mechanical Lock
  • Automatic Failure Display Function on LCD
  • Reloading the factory default settings by one-touch button
  • Easy Programming and Display via High Resolution LCD (Liquid Crystal Display)
  • 4 Menu Languages, Standard menu in English, German, Spanish and Turkish
  • Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms
  • STANDARD Built-in Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains
  • Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design
  • Manufactured for 7/24 Continuous Operation
  • 74 cm Net Passage Width and 200 cm Net Passage Height
  • Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 150 cm distance Moving Metallic Objects
  • Installation and Operation without interference between two detectors up to a distance of min. 5 cm
  • Audio-Visual alarms are noticeable at a range of 4 meters
  • Micro-Processor Settings does not change when there is an electricity cut-off
  • All Electronic Units (electronic unit, power supply, battery, adapter etc..) are inside the Equipment. No outer units.
  • Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use.
  • Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment)
  • SCADA Remote Control Set – Send Receive- Change settings by PC, Audio-Visual alarms can be monitored Real Time by PC and can be logged into Hard Disk Software Optional
  • REAL-TIME VIDEO PROSECUTION UNIT enabling recording Alarmed Visitors Pictures/All Visitors pictures or video with Time-Stamp to SD Card ~30.000 ImagesOptional
  1. Technical Features
* Weight: 56 kg * Gross weight: 64 kg * Operating voltage:70VAC – 270VAC / 50Hz – 60Hz ? Power: 10W Stand By- 20W (Alarm) * Package Dimensions (W x H x L): Box 1: 620 x230 x 2265 mm Box 2: 790 x 230 x 400 mm * Ambient Temperature: -20°C to +70°