S15-I

1758 times
  • International norms (NILECJ-0601 L1-5/IP40-41/EN60950 Class1) In conformity with CE European Union Norms and produced under ISO 9001: 2008 QMS
  • Multi-Zone – 9 Real Detection Zones(Up/Middle/Down and Left/Middle/Right)
  • Whilst Normal Operation, displays IN/OUT Counters and Security Level on LCD without abbreviations so that Security Staff can easily understand
  • Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. Can detect when tested both individually and in combination.
  • Displays the Detected Metal Objects location on Both Side Panels LEFT/RIGHT from bottom to top with Continuous LED Zone Indicators
  • Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.
  •  No Interferences between Zones and No False Alarms
  • Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top
  • Detects Metals regardless their orientation
  • 10 sensitivity levels, 246 adjustable sensitivity steps at each
  • Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance
  • Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit
  • Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By
  • Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media
  • Green/Red bicolor traffic through LEDs easily allows sight from distance 60 Persons/Minute and LED Alarm Indicators on side panels
  • Operation Mode, Programming Parameters and Error Codes are Displayed on Wide 4×20 Characters LCD Screen
  • Special Environmental Magnetic Interference Display Menu
  • Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation
  • IP 40-41 Protection Level (EN 60529)
  • Five Digit Incoming/ Outgoing & Alarm Counters (Visible/Invisible) can be reset to Zero.
  • Interference free Operation from other Electronic Devices and Does Not affect other Electronic Equipments. Necessary filtering precautions have been taken.
  • Four-digit changeable digital Pin Code
  • Automatic Failure Display Function on LCD
  • Reloading the factory default settings by one-touch button
  •  Easy Programming and Display via High Resolution LCD (Liquid Crystal Display)
  •  4 Menu Languages, Standard menu in English, German, Spanish and Turkish
  •  Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms
  •  STANDARD Built-in Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains
  •  No seasonal adjustment requirement thanks to its Digital Electronic System (DSP)
  •  Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design
  • Manufactured for 7/24 Continuous Operation
  • 74 cm Net Passage Width and 200 cm Net Passage Height
  • Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 150 cm distance Moving Metallic Objects
  • Audio-Visual alarms are noticeable at a range of 2 meters
  •  Micro-Processor Settings does not change when there is an electricity cut-off
  • All Electronic Units (electronic unit, power supply, battery, adapter etc..) are inside the Equipment. No outer units.
  • Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use.
  • Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment)
  •  SCADA remote data communication and Networking of Multiple Metal Detectors – Send – Change settings by PC – Software Optional
  • Manufactured using the latest technology components and Resistant to Vibration & Impact
  1. Technical Features
* Weight: 54 kg * Gross weight: 62 kg * Operating voltage:70VAC – 270VAC / 50Hz – 60Hz * Power: 10W Stand By- 20W (Alarm) * Package Dimensions (W x H x L): Box 1: 620 x230 x 2265mm Box 2: 225 x 235 x 790 mm * Ambient Temperature: -20°C to +70°