S15-I
1553 times
- International norms (NILECJ-0601 L1-5/IP40-41/EN60950 Class1) In conformity with CE European Union Norms and produced under ISO 9001: 2008 QMS
- Multi-Zone – 9 Real Detection Zones(Up/Middle/Down and Left/Middle/Right)
- Whilst Normal Operation, displays IN/OUT Counters and Security Level on LCD without abbreviations so that Security Staff can easily understand
- Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. Can detect when tested both individually and in combination.
- Displays the Detected Metal Objects location on Both Side Panels LEFT/RIGHT from bottom to top with Continuous LED Zone Indicators
- Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.
- No Interferences between Zones and No False Alarms
- Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top
- Detects Metals regardless their orientation
- 10 sensitivity levels, 246 adjustable sensitivity steps at each
- Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance
- Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit
- Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By
- Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media
- Green/Red bicolor traffic through LEDs easily allows sight from distance 60 Persons/Minute and LED Alarm Indicators on side panels
- Operation Mode, Programming Parameters and Error Codes are Displayed on Wide 4×20 Characters LCD Screen
- Special Environmental Magnetic Interference Display Menu
- Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation
- IP 40-41 Protection Level (EN 60529)
- Five Digit Incoming/ Outgoing & Alarm Counters (Visible/Invisible) can be reset to Zero.
- Interference free Operation from other Electronic Devices and Does Not affect other Electronic Equipments. Necessary filtering precautions have been taken.
- Four-digit changeable digital Pin Code
- Automatic Failure Display Function on LCD
- Reloading the factory default settings by one-touch button
- Easy Programming and Display via High Resolution LCD (Liquid Crystal Display)
- 4 Menu Languages, Standard menu in English, German, Spanish and Turkish
- Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms
- STANDARD Built-in Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains
- No seasonal adjustment requirement thanks to its Digital Electronic System (DSP)
- Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design
- Manufactured for 7/24 Continuous Operation
- 74 cm Net Passage Width and 200 cm Net Passage Height
- Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 150 cm distance Moving Metallic Objects
- Audio-Visual alarms are noticeable at a range of 2 meters
- Micro-Processor Settings does not change when there is an electricity cut-off
- All Electronic Units (electronic unit, power supply, battery, adapter etc..) are inside the Equipment. No outer units.
- Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use.
- Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment)
- SCADA remote data communication and Networking of Multiple Metal Detectors – Send – Change settings by PC – Software Optional
- Manufactured using the latest technology components and Resistant to Vibration & Impact
SX-I
1582 times
- International norm (NILECJ-0601-0602/NIJ/EN60950 Class1/IP 44 In conformity with CE European Union Norms and produced under ISO 9001: 2008 QMS and ECAC DOC 30 STANDADRD 2 COMPLIANCE .
- Multi-Zone – 9 Real Detection Zones (15 Distinct Detection Zones – Divided Scanning Area and properly displayed Zone Led Indicators with Special Coil Geometry)
- Separate Zone Sensitivity Setting Feature
- Standard Preset JAILHOUSE/AIRPORT/MILITARY/POLICE PREMISES,SHOPPING MALL Security Modes
- Whilst Normal Operation, displays IN/OUT Counters and Security Level on GRAPHICAL LCD without abbreviations so that Security Staff can easily understand
- Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. It can detect when tested both individually and in combination and Gives Audio-Visual Alarms. Can operate at JAILHOUSE Sensitivity Spectrums!..
- SMART DETECTOR – Fast and consistent calibration, Automatic Sensitivity Program selects the correct sensitivity for a specific weapon or a recognized test object
- Displays the Detected Metal Objects location on Both Side Panels LEFT/RIGHT from bottom to top with Continuous LED Zone Indicators
- Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.
- No Interferences between Zones and No False Alarms
- Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top
- Detects Metals regardless their orientation
- 20 sensitivity levels, 246 adjustable sensitivity steps at each, Preset NILECJ Sensitivity Program, 5 Preset Programs
- Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance
- Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit
- Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By
- Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media
- Green/Red bicolor traffic through LEDs easily allows sight from distance 60 Persons/Minute and LED Alarm Indicators on side panels
- Adjustable Random Alarm possibilities to give alarm for clean visitors at a selected ratio.
- Record Statistics of Operation Duration, Number of Visitors and Alarms (Real/Random Alarms Separately)
- Special Environmental Magnetic Interference Display Menu
- Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation
- Adjustable Alarm Duration (Detection Speed Regardless Alarms)
- Reloading the factory default settings by one-touch button Five Digit Incoming/Outgoing &Alarm Counters (Visible/Invisible) – Reset
- IR Protection Feature enabling perfect low false alarm operation/ Continuous Detection Mode Selection Enabled
- Interference free Operation from other Electronic Devices and Does Not affect other Electronic Equipments. Necessary filtering precautions have been taken
- Four-digit changeable digital Pin Code and Mechanical Lock
- Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment)
- Easy Programming and Display via High Resolution LCD (Liquid Crystal Display)
- 4 Menu Languages, Standard menu in English, German, Spanish and Turkish
- Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms
- STANDARD Built-in Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains
- Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design
- Manufactured for 7/24 Continuous Operation
- 74 cm Net Passage Width and 200 cm Net Passage Height
- Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 200 cm distance Moving Metallic Objects
- Installation and Operation without interference between two detectors up to a distance of min. 5 cm
- Audio-Visual alarms are noticeable at a range of 4 meters
- Micro-Processor Settings does not change when there is an electricity cut-off
- Magnetic Field inside all passage area is 0,1 Gauss
- All Electronic Units (electronic unit, power supply, battery, adapter etc..) are inside the Equipment. No outer units.
- Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use. OPTIONALS
- SCADA Remote Control Set – Send Receive- Change settings by PC, Audio-Visual alarms can be monitored Real Time by PC and can be logged into Hard Disk Software Optional
- REAL-TIME VIDEO PROSECUTION UNIT enabling recording Alarmed Visitors Pictures/All Visitors pictures or video with Time-Stamp to SD Card ~30.000 Images Optional
- IRDA – Remote Control Unit (Optional)
- Detection Functions has been tested with ECAC/NIJ/TSA Test Kits and Certified
SX
1651 times
- International norms (NILECJ-0601 L1-5/IP44/EN60950 Class1) In conformity with CE European Union Norms and produced under ISO 9001: 2008 QMS
- Multi-Zone – 9 Real Detection Zones(Up/Middle/Down and Left/Middle/Right)
- Separate Zone Sensitivity Setting Feature
- Whilst Normal Operation, displays IN/OUT Counters and Security Level on LCD without abbreviations so that Security Staff can easily understand
- Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. Can detect when tested both individually and in combination and Gives Audio-Visual Alarms. Can operate at JAILHOUSE Sensitivity Spectrums!..
- SMART DETECTOR – Fast and consistent calibration, Automatic Sensitivity Program selects the correct sensitivity for a specific weapon or a recognized test object
- Displays the Detected Metal Objects location on Both Side Panels LEFT/RIGHT from bottom to top with Continuous LED Zone Indicators
- Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.
- No Interferences between Zones and No False Alarms
- Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top
- Detects Metals regardless their orientation
- 20 sensitivity levels, 246 adjustable sensitivity steps at each, Preset NILECJ Sensitivity Program, Optional – 5 Preset Programs
- Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance
- Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit
- Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By
- Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media
- Green/Red bicolor traffic through LEDs easily allows sight from distance 60 Persons/Minute and LED Alarm Indicators on side panels
- Operation Mode, Programming Parameters and Error Codes are Displayed on Wide 4×20 Characters LCD Screen
- Special Environmental Magnetic Interference Display Menu
- Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation
- Adjustable Alarm Duration (Detection Speed Regardless Alarms)
- IR Protection Feature enabling perfect low false alarm operation/ Continuous Detection Mode Selection Enabled
- IP 44 Protection Level (EN 60529)
- Five Digit Incoming/ Outgoing & Alarm Counters (Visible/Invisible) can be reset to Zero
- Interference free Operation from other Electronic Devices and Does Not affect other Electronic Equipments. Necessary filtering precautions have been taken
- Four-digit changeable digital Pin Code and Mechanical Lock
- Automatic Failure Display Function on LCD
- Reloading the factory default settings by one-touch button
- Easy Programming and Display via High Resolution LCD (Liquid Crystal Display)
- 4 Menu Languages, Standard menu in English, German, Spanish and Turkish
- Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms
- STANDARD Built-in Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains
- Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design
- Manufactured for 7/24 Continuous Operation
- 74 cm Net Passage Width and 200 cm Net Passage Height
- Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 150 cm distance Moving Metallic Objects
- Installation and Operation without interference between two detectors up to a distance of min. 5 cm
- Audio-Visual alarms are noticeable at a range of 4 meters
- Micro-Processor Settings does not change when there is an electricity cut-off
- All Electronic Units (electronic unit, power supply, battery, adapter etc..) are inside the Equipment. No outer units.
- Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use.
- Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment)
- SCADA Remote Control Set – Send Receive- Change settings by PC, Audio-Visual alarms can be monitored Real Time by PC and can be logged into Hard Disk Software Optional
- REAL-TIME VIDEO PROSECUTION UNIT enabling recording Alarmed Visitors Pictures/All Visitors pictures or video with Time-Stamp to SD Card ~30.000 ImagesOptional
S9
1643 times
- International norms (NILECJ-0601 L1-5/IP40-41/EN60950 Class1) In conformity with CE European Union Norms and produced under ISO 9001: 2008 QMS
- Multi-Zone – 9 Real Detection Zones(Up/Middle/Down and Left/Middle/Right)
- Whilst Normal Operation, displays IN/OUT Counters and Security Level on LCD without abbreviations so that Security Staff can easily understand
- Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. Can detect when tested both individually and in combination.
- Displays the Detected Metal Objects location on Both Side Panels LEFT/RIGHT from bottom to top with Continuous LED Zone Indicators
- Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.
- No Interferences between Zones and No False Alarms
- Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top
- Detects Metals regardless their orientation
- 10 sensitivity levels, 246 adjustable sensitivity steps at each
- Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance
- Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit
- Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By
- Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media
- Green/Red bicolor traffic through LEDs easily allows sight from distance 60 Persons/Minute and LED Alarm Indicators on side panels
- Operation Mode, Programming Parameters and Error Codes are Displayed on Wide 4×20 Characters LCD Screen
- Special Environmental Magnetic Interference Display Menu
- Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation
- IP 40-41 Protection Level (EN 60529)
- Five Digit Incoming/ Outgoing & Alarm Counters (Visible/Invisible) can be reset to Zero.
- Interference free Operation from other Electronic Devices and Does Not affect other Electronic Equipments. Necessary filtering precautions have been taken.
- Four-digit changeable digital Pin Code
- Automatic Failure Display Function on LCD
- Reloading the factory default settings by one-touch button
- Easy Programming and Display via High Resolution LCD (Liquid Crystal Display)
- 4 Menu Languages, Standard menu in English, German, Spanish and Turkish
- Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms
- STANDARD Built-in Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains
- No seasonal adjustment requirement thanks to its Digital Electronic System (DSP)
- Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design
- Manufactured for 7/24 Continuous Operation
- 74 cm Net Passage Width and 200 cm Net Passage Height
- Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 150 cm distance Moving Metallic Objects
- Audio-Visual alarms are noticeable at a range of 2 meters
- Micro-Processor Settings does not change when there is an electricity cut-off
- All Electronic Units (electronic unit, power supply, battery, adapter etc..) are inside the Equipment. No outer units.
- Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use.
- Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment)
- SCADA remote data communication and Networking of Multiple Metal Detectors – Send – Change settings by PC – Software Optional
- Manufactured using the latest technology components and Resistant to Vibration & Impact